EN 71

 

 

 

 

 

 

 

 

 

 

24.

Although Snapshot is

24. •The subject is too bright with

24. •Set “B-IN FLASH” to “ON”

 

 

 

 

attempted, flash does not take

 

the flash set to “AUTO” or

 

in MANUAL Menu.

 

 

 

 

place.

 

“AUTO C”.

 

( pg. 31, 37)

 

 

 

 

 

 

•If blinks, the flash is being

 

•It can take up to 10 seconds

 

 

 

 

 

 

charged.

 

to charge the flash.

 

 

 

 

 

 

•The camcorder is in the

 

•Set the camcorder in the

 

 

 

 

 

 

Record mode.

 

Record-Standby mode.

 

 

 

 

 

 

 

 

( pg. 42, 43)

 

 

 

 

 

 

 

 

 

 

25.

Although a Snapshot is taken

25. •The subject does not look

25. •The subject should look

 

 

 

 

with the flash, Red-Eye

 

straight toward the flash.

 

straight toward the flash,

 

 

 

 

Reduction does not take place.

 

•The subject does not look at

 

especially the first flash. If

 

 

 

 

 

 

the first flash, which is an

 

the subject does not see the

 

 

 

 

 

 

important part of Red-Eye

 

first flash, it will be difficult

 

 

 

 

 

 

Reduction.

 

for Red-Eye Reduction to

 

 

 

 

 

 

•The camcorder is too far

 

take place. ( pg. 43)

 

 

 

 

 

 

from the subject.

 

•The flash is effective for

 

 

 

 

 

 

•In MANUAL Menu, “B-IN

 

subjects at a distance of

 

 

 

 

 

 

FLASH” is not set to

 

approx. 0.7 m to 2 m from

 

 

 

 

 

 

“AUTO C”.

 

the camcorder. ( pg. 43)

 

 

 

 

 

 

 

 

•Set “B-IN FLASH” to

 

 

 

 

 

 

 

 

“AUTO C” to display the

 

 

 

 

 

 

 

 

Red-Eye Reduction indicator.

 

 

 

 

 

 

 

 

( pg. 31, 37)

 

 

 

 

 

 

 

 

 

 

 

 

Other problems

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYMPTOM

 

POSSIBLE CAUSES

 

CORRECTIVE ACTION

 

 

 

26.

The CHARGE indicator on the

26.

•The temperature of the

26.

•To protect the battery, it is

 

 

 

 

AC Power Adapter/Charger

 

battery is extremely high/low.

 

recommended to charge it in

 

 

 

 

does not light.

 

•Charging is difficult in places

 

places with a temperature of

 

 

 

 

 

 

subject to extremely high/

 

10°C to 35°C. ( pg. 74)

 

 

 

 

 

 

low temperatures.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27.

“SET DATE/TIME!” appears.

27.

•The built-in clock’s

27.

•Connect the camcorder to an

 

 

 

 

 

 

rechargeable lithium battery

 

AC outlet using the AC Power

 

 

 

 

 

 

is discharged.

 

Adapter/Charger for over 24

 

 

 

 

 

 

•The previously set date/time

 

hours to charge the clock’s

 

 

 

 

 

 

is erased.

 

lithium battery. ( pg. 14)

REFERENCES

 

 

 

 

 

 

 

 

29.

Some functions are not

29.

•The Power Switch is set to

29.

•Set the Power Switch to “M”.

 

28.

There is no picture.

28.

•The camcorder is not getting

28.

•Turn the camcorder’s power

 

 

 

 

 

 

power, or some other

 

off and on again. ( pg. 13)

 

 

 

 

 

 

malfunction exists.

 

 

 

 

 

 

available using the MENU

 

“A”.

 

( pg. 13)

 

 

 

 

Wheel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30.

Files stored in the memory

30.

•Files stored in the memory

30.

•Remove protection from the

 

 

 

 

card cannot be deleted.

 

card are protected.

 

files stored in the memory

 

 

 

 

 

 

 

 

card and delete them.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

( pg. 27 –28)

 

 

 

 

 

 

 

 

 

 

 

 

31.

When the image is printed

31.

•This is not a malfunction.

31.

•By recording with “DIS”

 

 

 

 

from the printer, a black bar

 

 

 

activated ( pg. 31, 35) this

 

 

 

 

appears at the bottom of the

 

 

 

can be avoided.

 

 

 

 

screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTINUED ON NEXT PAGE