EN7
GETTING STARTED
A
B
To DC OUT connector
To AC outlet
AC Power Adapter/Charger
AA-V20U
DC cord
ATTENTION:

Before detaching the power source,

make sure that the camcorder’s power

is turned off. Failure to do so can result

in a camcorder malfunction.

USING THE BATTERY PACK

1
Hook the non-terminal end of the battery pack to the
camcorder and push the battery pack in until it
locks in place .
•
If the battery pack is attached in the wrong position,
a malfunction may occur.
To Detach The Battery Pack. . .
.... slide BATTERY RELEASE and pull out the battery pack.
BATTERY RELEASE Switch
Hook on.
Push in.
To DC IN
connector
Core filter USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in
the illustration).
NOTES:
●
The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from 110 V
to 240 V.
●
For other notes,
Z
pg. 6.
( ) : when the video light is on (GR-DVF21 only).
NOTES:
●
Recording time is reduced significantly under the
following conditions:
•
Zoom or Record-Standby mode is engaged repeatedly.
•
The LCD monitor is used repeatedly.
●
Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
INFORMATION:
VU-V856KIT is a set composed of the BN-V856U battery
pack and AA-V80U AC Power Adapter/Charger.
Read the VU-V856KIT’s instruction manuals before using.
It is impossible to charge the BN-V856U battery pack
using the provided AC Power Adapter/Charger. Use the
optional AA-V80U AC Power Adapter/Charger.
Approximate recording time
Battery pack
BN-V207U
BN-V214U
(optional)
BN-V856U
(optional)
LCD monitor on/
Viewfinder off
50 min.
(25 min.)
1 hr. 55 min.
(1 hr.)
7 hrs.
(4 hrs.)
LCD monitor off/
Viewfinder on
1 hr.
(30 min.)
2 hrs. 20 min.
(1 hr. 10 min.)
8 hrs. 30 min.
(4 hrs. 30 min.)