EN63
USER MAINTENANCE

After Use

1
Set the Power Switch to “POWER OFF” to turn off
the camcorder.
2
Press the Monitor Open Button and open the LCD
monitor to an angle over 60 degrees. Press OPEN/
EJECT in the direction of the arrow then swing the
cover open until it locks. The cassette holder opens
automatically. Remove the cassette.
3
Press “PUSH HERE” to close the cassette cover.
4
Close and lock the LCD monitor.
5
Slide BATTERY RELEASE to remove the battery pack.
6
Turn the LENS COVER Open/Close Ring to close
the lens cover.

Cleaning The Camcorder

1

CLEAN EXTERIOR

Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it well to
wipe off heavy dirt. Then wipe again with a dry
cloth.
2

CLEAN LCD MONITOR

Open the LCD monitor and wipe gently with soft
cloth. Be careful not to damage the monitor. Close
the LCD monitor.
3

CLEAN LENS

Blow it with a blower brush, then wipe gently with
lens cleaning paper.
4

REMOVE EYEPIECE

Turn the eyepiece counterclockwise and pull it out.
5

CLEAN VIEWFINDER

Remove dust using a blower brush.
6

RE-ATTACH EYEPIECE

Re-attach the eyepiece and turn it clockwise.
Remove.
Monitor Open
Button
OPEN/EJECT
LENS COVER Open/Close Ring
PUSH HERE
Set to “POWER OFF”.
BATTERY RELEASE
NOTES:
●
Avoid using strong cleaning agents such as benzine or alcohol.
●
Cleaning should be done only after the battery pack has been removed or other power units have been
disconnected.
●
Mould may form if the lens is left dirty.
●
When using a cleaner or chemically treated cloth refer to the cautions of each product.
●
When removing the eyepiece, be sure to hold the viewfinder securely.