JVC LYT0278-001A Snapshot mode cannot be used Digital Zoom does not work, Menu is set to OFF

EN59

SYMPTOM

11.Snapshot mode cannot be used.

12.Digital Zoom does not work.

13.Programme AE with special effects and Fade/ Wipe Effects do not work.

14.The Black & White Fader does not work.

15.The Dissolve function does not work.

16.Scene transition does not go as expected.

17.The Picture Wipe and Dissolve functions do not work.

POSSIBLE CAUSES	CORRECTIVE ACTION
11. •The Squeeze mode is	11. • Disengage the Squeeze
selected.	mode (☞ pg. 25).
12. •16X optical zoom is selected.	12. • Wait until the Picture Wipe
•Picture Wipe or Dissolve are	or Dissolve effects are
being used in a scene	completed (☞ pg. 28).
transition.	• Do not attempt to take a
•Snapshot was attempted	Snapshot when performing
during Digital Zoom.	Digital Zoom (☞ pg. 22, 23).
13. •The Power Switch is set to	13. • Set the Power Switch to
“AUTO”.	“PRO.” (☞ pg. 27, 30).
14. •The Sepia or Monotone	14. • Turn off Sepia and Mono-
mode is activated.	tone (☞ pg. 30).
15. •The Sepia, Monotone or Slow	15. • Turn off Sepia, Monotone or
Shutter mode of Programme	Slow before adding Dissolve
AE with special effects is	to a scene transition
activated.	(☞ pg. 30).
•The Squeeze mode is	• Make sure that the Squeeze
selected.	mode in the Recording
•The previously selected mode	Menu is set to “OFF”
of Programme AE with	(☞ pg. 24).
special effects was changed	• Make sure you have selected
after the last selected scene	the mode of Programme AE
for editing was registered.	with special effects you want
	before starting editing
	(☞ pg. 30).
16. •When using “Picture Wipe/	16.
Dissolve” (☞ pg. 28), there is
a delay of a fraction of a
second between the previous
record stop-point and the
Dissolve start-point. This is	————
normal, but this slight delay
becomes especially notice-
able when shooting fast-
moving subject or during
rapid panning.
17. •The last selected editing	17. • Select Picture Wipe or
scene is ending.	Dissolve before beginning
•At the end of the last selected	recording. The effects are
scene for editing, the Power	then automatically activated
Switch was set to “OFF”.	(☞ pg. 28).
•The power is off.	• Do not turn off the
	camcorder’s power after
	setting Edit-In and Edit-Out
	points, as they will all be
	erased (☞ pg. 28).
	• The camcorder automati-
	cally shuts off after 5
	minutes have elapsed in the
	Record-Standby mode.
	Make sure you continue
	operations within 5 minutes
	after engaging Record-
	Standby mode (☞ pg. 28).

CONTINUED ON NEXT PAGE