8 EN
PAUSE
3
1
2
Grip Adjustment
1
Separate the Velcro strip.
2
Pass your right hand through the loop and grasp
the grip.
3
Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and
Power Zoom Lever. Refasten the Velcro strip.
Viewfinder Adjustment
1
Set the Power Switch to “ ” or “ ” while
pressing down the Lock Button located on the
switch.
2
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly
focused.
Dioptre Adjustment
Control
Power Switch
GETTING STARTED
(cont.)Shoulder Strap Attachment
1
Make sure the battery pack or DC cord is
removed. Following the illustration, thread the
strap through the eyelet 1, then fold it back and
thread it through the buckle 2. Repeat the
procedure to attach the other end of the strap to
the other eyelet 3 located under the Grip Strap,
making sure the strap is not twisted.

CAUTION:

When using a tripod, be sure to open and

extend its legs fully to stabilise the

camcorder. To prevent damage to the unit

caused by falling over, do not use a small-

sized tripod.

Tripod Mounting
1
Align the screw and camera direction stud on
the tripod with the camera’s mounting socket
and stud hole. Then tighten the screw.
•Some tripods are not equipped with studs.
Power
Zoom Lever
Recording
Start/Stop button