1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 34).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV . . .
• Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the
Menu Screen ( pg. 32).
• Time Code
.... set “TIME CODE” to “ON” or “OFF” in the
Menu Screen ( pg. 32).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 32). Or, press DISPLAY on the remote control (provided).
EN35
NOTES:
●It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack ( pg. 9).
●Use the provided Audio/Video cable, making sure to connect the end with a core filter to the camcorder. The core filter reduces interference.
●The
Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.
●To monitor the picture and sound from the
camcorder without inserting a tape, set the camcorder’s Power Switch to “
” or “ 
”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
