EN55, LCD monitor or viewfinder indications blink

EN55

24.During recording, the date/ time does not appear.

25.The indicators and messages do not appear.

26.Images on the LCD monitor appear dark or whitish.

27.The rear of the LCD monitor is hot.

28.The indicators and the image color on the LCD monitor are not clear.

	POSSIBLE CAUSES		CORRECTIVE ACTION
	24. •“DATE/TIME” is set to		24. • Set “DATE/TIME” to “ON”
	“OFF” in the Menu Screen.		in the Menu Screen
	•Self-Recording is performed.		( pg. 25).
			• During Self-Recording, the
			date/time does not appear
			( pg. 15).

	25. •“ON SCREEN” is set to		25. • Set “ON SCREEN” to “LCD”
	“SIMPLE” or “TIME CODE”		or “LCD/TV” and set
	is set to “OFF” in the Menu		“TIME CODE” to “ON”
	Screen.		in the Menu Screen
			( pg. 25, 32).

	26. •In places subject to low		26. • Adjust the brightness and
	temperature, images become		angle of the LCD monitor
	dark due to the characteristics		( pg. 14, 15).
	of the LCD monitor. When
	this happens, the displayed
	colors differ from those that
	are actually recorded. This is
	not a defect of the camcorder.
	•When the LCD monitor's
	fluorescent light reaches the
	end of its service life,
	images on the LCD monitor
	become dark. Consult your
	nearest JVC dealer.

	27. •The light used to illuminate		27. • Close the LCD monitor to
	the LCD monitor causes it to		turn it off or set the Power
	become hot.		Switch to “OFF”, and let the
			unit cool down.

	28. •This may occur when the		28.
	surface or the edge of the		————
	LCD monitor is pressed.

	29. •Certain Fade/Wipe effects,		29. • Re-read the sections
	certain modes of Program AE		covering Fade/Wipe effects,
	with special effects, “DIS”		Program AE with special
	and other functions that		effects and “DIS”
	cannot be used together are		( pg. 24, 26 – 28).
	selected at the same time.

CONTINUED ON NEXT PAGE