44 EN
Power Switch
To AV
Core filter
Connector |
| To S | |
| |||
cover** |
| ||
|
| ||
|
|
|
|
|
|
|
|
DUBBING
Dubbing To A VCR
1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 40 and 41.
2 Set the VIDEO/DSC Switch to “VIDEO”, then set the
camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
3
4 Engage the camcorder’s Play mode to find a spot just before the
5 Press 4/6 on the camcorder and engage the VCR’s Record mode.
6 Engage the VCR’s
Core filter
Audio/Video cable
To AUDIO, VIDEO* and
7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.
NOTES:
●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the Menu
Screen ( pg. 32).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
VCR (Recording deck)
TV |
*Connect when an
**When connecting the cables, open this cover.
Screen ( pg. 32).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the
Menu Screen ( pg. 32). Or, press DISPLAY on the remote control.
●When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.
●It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack ( pg. 7).
●You can use Playback Zoom ( pg. 50) or Playback Special Effects ( pg. 51) in step 5.