Connector cover**
To S
To AV
To JLIP/ 
EDIT
Core filter
EN53
MAKE CONNECTIONS
Also refer to pg. 40 and 41.
1
A JVC VCR equipped with a remote pause connector . . .
... connect the editing cable to the Remote PAUSE connector.
A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .
... connect the editing cable to the R.A.EDIT connector.
A VCR other than above . . .
... connect the editing cable to the remote control’s PAUSE IN connector.
Core filter
To AUDIO, VIDEO* and
VCR
Audio/Video cable
Editing cable (provided)
To Remote PAUSE or R.A.EDIT
2 Insert a recorded tape into the camcorder. Set the VIDEO/DSC Switch to “VIDEO”, then set the Power
Switch to “ 
” while pressing down the Lock Button located on the switch.
3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).
NOTES:
●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “ON” or “OFF” in the Menu
To PAUSE IN
DISPLAY
TV
*Connect when an
**When connecting cables, open this cover.
ATTENTION FOR EDITING CABLE
Make sure you connect the end with the core filter (plug which has 3 rings around the pin) to the camcorder.
Screen ( pg. 32).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 32).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 32). Or, press DISPLAY on the remote control.
●When connecting the cables, make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.
●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an
CONTINUED ON NEXT PAGE
