MENU/BRIGHT Wheel

VIDEO/DSC Switch

 

 

 

 

(Open the LCD monitor

 

 

 

 

to access this switch.)

 

A

OFF

 

 

L

Y

 

P

 

 

 

 

 

 

EN39

Initialising The Built-in Memory

You can initialise the camcorder’s built-in memory anytime.

After initialising, all images stored in the memory, including those which have been protected, are cleared.

1 Set the VIDEO/DSC Switch to “ ”, then set the

Power Switch to “ ”, while pressing down the Lock Button located on the switch.

2 Press MENU/BRIGHT. The Menu Screen appears.

3 Rotate MENU/BRIGHT to select “ ” and press it. “DSC MENU” appears.

Display

DSC MENU

1RE TURN

I NDEX

S L I DE SHOW

PROT ECT

DEL E T E

FORMAT CANCE L EXECUT E

Lock Button

Power Switch

Menu Screen

4 Rotate MENU/BRIGHT to select “FORMAT” and press it. The Sub Menu appears.

5 Rotate MENU/BRIGHT to select “EXECUTE” and press it. “FORMATTING IN PROGRESS” appears and the built-in memory is initialised. When initialisation is finished, “NO IMAGES STORED” appears.

•To cancel initialisation, rotate MENU/BRIGHT to select “CANCEL” and press it.

CAUTION:

Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Power Adapter/Charger, as the memory may be corrupted if the battery becomes exhausted during initialisation. If the memory becomes corrupted initialise it again.

Page 39
Image 39
JVC GR-DVL800 Initialising The Built-in Memory, EN39, You can initialise the camcorder’s built-in memory anytime