EN 11

Using The Battery PackINFORMATION:

 

The optional extended-use battery pack kit is a set

 

composed of a battery pack and AC Power Adapter/

 

Charger:

 

VU-V840 KIT: BN-V840U battery pack & AA-V15U

 

AC Power Adapter/Charger

Notches

VU-V856 KIT: BN-V856U battery pack & AA-V80U

AC Power Adapter/Charger

 

 

Read the kit’s instruction manual before using.

 

Also, by using the optional JVC VC-VBN856U DC

 

Cord, it will be possible to connect BN-V840U or

BATT. RELEASE

BN-V856U battery packs to the camcorder and

supply power directly to the camcorder.

Switch

 

1Align the battery pack’s two notches with the tabs on the camcorder’s battery pack mount.

2Insert the terminal end 1 of the battery pack into the battery pack mount.

3Firmly push the end 2 of the battery pack until it locks into place.

To detach the battery pack...

While sliding down BATT. RELEASE, remove it.

NOTE:

When using the battery pack and the S/AV/Editing cable, disconnect the S/AV/Editing cable first ( pg. 22), and then detach the battery pack.

Maximum continuous recording time
Battery packLCD monitor onViewfinder on

 

 

 

BN-V107U

1 hr.

1 hr. 10 min.

 

 

 

BN-V114U

2 hr.

2 hr. 20 min.

(optional)

 

 

 

 

 

BN-V840U

5 hr. 10 min.

6 hr.

(optional)

 

 

 

 

 

BN-V856U

7 hr. 40 min.

9 hr. 10 min.

(optional)

 

 

 

 

 

NOTES:

●Recording time is reduced significantly under the following conditions:

•Zoom or Record-Standby mode is engaged repeatedly.

•The LCD monitor is used repeatedly.

•The playback mode is engaged repeatedly.

●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

Using AC Power
To AC outlet

Power cord

AC Power Adapter/

Charger

POWER indicator (red)

To DC OUT connector

DC cordTo battery pack mount

1Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger.

2Plug the AC Power Adapter/Charger’s power cord into an AC outlet. The POWER indicator lights.

3Attach the coupler part of the DC cord to the camcorder’s battery pack mount.

4Plug the DC cord to the DC OUT connector on the AC Power Adapter/Charger.

NOTES:

●The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

●For other notes,  pg. 64.