80 EN

 

 

INDEX Indications (cont.)
Warning Indications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indications

 

 

Function

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Displays the battery remaining power.

 

 

 

 

 

Remaining power level: high

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remaining power level: exhausted

 

 

 

 

 

 

 

 

 

 

 

 

As the battery power comes close to nil, the battery indicator blinks.

 

 

 

 

 

When the battery power is exhausted, power turns off automatically.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Appears when no tape is loaded.

( pg. 15)

 

 

 

 

 

 

 

 

 

 

 

 

CHECK TAPE’S ERASE

Appears when the erase protection tab is set to “SAVE” while the Power Switch is

PROTECTION TAB

set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”.

 

 

 

 

( pg. 13)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HEAD CLEANING

Appears if dirt is detected on the heads during recording. Use an optional

cleaning cassette.

( pg. 73)

REQUIRED USE

 

 

 

 

 

 

CLEANING CASSETTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONDENSATION

Appears if condensation occurs. When this indication is displayed, wait more

than 1 hour until condensation disappears.

 

 

OPERATION PAUSED

 

 

 

 

 

 

PLEASE WAIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TAPE!

Appears if a tape is not loaded when the Recording Start/Stop Button or

SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and

 

 

 

the VIDEO/MEMORY Switch is set to “VIDEO”.

 

 

 

 

 

 

 

 

 

 

 

TAPE END

Appears when the tape ends during recording or playback.

( pg. 64)

 

 

 

 

 

 

 

 

 

SET DATE/TIME!

● Appears when the date/time is not set.

( pg. 14)

● Appears when the built-in clock (lithium) battery is discharged and the

 

 

 

previously set date/time is erased.

( pg. 14)

 

 

 

 

 

 

 

 

LENS COVER

Appears for 5 seconds after power is turned on if the lens cover is not slid down.

 

 

 

 

 

 

 

 

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 56)

 

 

 

 

 

 

 

 

A. DUB ERROR!

● Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.

<CANNOT DUB ON A

 

 

 

 

( pg. 56)

LP RECORDED TAPE>

● Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.

<CANNOT DUB ON A

 

 

 

 

( pg. 56)

16bit RECORDING>

● Appears if A. DUB (D) on the remote control is pressed when the erase

<CHECK TAPE’S

protection tab is set to “SAVE”.

( pg. 56)

ERASE PROTECTION

● Appears if Audio Dubbing using Digital Sound Effects is attempted when a

TAB>

memory card is not loaded.

( pg. 56)

<NO SOUND STORED>

 

 

 

 

 

 

<MEMORY CARD!>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INSERT ERROR!

Appears if Insert Editing is attempted on a blank portion of a tape.

( pg. 57)