JVC NOTE:, NOTES:, USB cable, 10 EN GETTING STARTED, Audio Extension cable, How To Attach The Lens Cap, How To Use The Audio Extension Cable

10 EN GETTING STARTED
How To Attach The Lens Cap	How To Attach The Core Filter (for USB Cable
To protect the lens, attach the	(except GR-DX27) and Audio Extension Cable)
provided lens cap to the	Attach the core filters to the cables. The core filter
camcorder as shown in the
	reduces interference.
illustration.
	1 Release the stoppers on both ends of the core filter.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is flush
to the camcorder.		Stopper
	2 Run the cable through the core filter, leaving approx.
	3 cm of cable between the cable plug and the core filter.
	USB cable
	Wind the cable once around the outside of the core filter
	as shown in the illustration.
	3 cm	Core filter (large)

Place here during shooting.

Wind once.

How To Use The Audio Extension Cable

Audio Extension cable

Wind the cable twice around the outside of the core filter as shown in the illustration.

When using an optional external microphone, connect to the provided Audio extension cable (with a core filter attached), then connect the Audio extension cable to the camcorder. The core filter reduces interference. (See the right column.)

Open the cover.

To MIC

Audio extension cable (provided)

Core filter

3 cm Core filter (small)

Wind twice.

●Wind the cable so that it is not slack.

3 Close the core filter until it clicks shut.

USB cable Audio Extension cable

Stereo microphone

NOTES:

● Take care not to damage the cable.

●When connecting a cable, attach the end with the core filter

to the camcorder.