EDITING EN 43

Select Scenes

NOTES:

RM-V717U (optional)

When choosing a scene, set Edit-In and Edit-Out points so

that there is a relatively large difference between them.

If the search time for an in-point exceeds 5 minutes, the

recording deck’s Record-Standby mode will be cancelled

and editing will not take place.

If there are blank portions before or after the Edit-In and

FADE/WIPE

PLAY

Edit-Out points, a blue screen may be included in the edited

version.

EFFECTPAUSE

EDIT IN/OUTR.A.EDIT

ON/OFF

CANCEL VCR REC STBY

6 Press PLAY (U) and then press R.A.EDIT ON/OFF on the remote control.

Turning off the camcorder’s power erases all registered

Edit-In and Edit-Out points.

If you select Sepia or Monotone mode from Program AE

with special effects, you cannot use the Black & White

Fader. In this case the Black & White indicator begins

blinking. Once the next Edit-In point is registered, the effect

is turned off. To combine these effects, use Sepia or

Monotone during recording, then use Black & White Fader

The Random Assemble Editing Menu appears.

7 If using a Wipe/Fader at the beginning of the scene, press FADE/WIPE on the remote control.

Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

Selected parameter

 

I N

OUT MODE

1 – – – – : – –

~

2~

3~

4~

5~

6~

7~

8~

T I ME CODE

– : – –

TOTAL

00 : 00

during Random Assemble Editing.

It is not possible to use Wipe/Fader effects and Program AE

with special effects during Random Assemble Editing using

a DV cable.

8 At the beginning of the scene, press EDIT IN/OUT on the remote control. The Edit-In position appears in the Random Assemble Editing Menu.

9 At the end of the scene, press EDIT IN/OUT. The Edit- Out position appears in the Random Assemble Editing Menu.

10 If using a Wipe/Fader at the end of the scene, press FADE/WIPE.

Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

If you select a Wipe/Fader effect for an Edit-Out point, the effect is automatically applied to the following Edit-In point.

When you use Wipe/Fader effects, that time is included in the total time.

11 If using Playback Special Effects, press EFFECT. ( pg. 20)

12 Repeat steps 8 through 11 to register additional scenes.

To change previously registered points, press CANCEL on the remote control. The registered points disappear, one at a time, from the most recently registered point.

If you are not using Wipe/Fader or Program AE with special effects, repeat steps 8 and 9 only.