VIDEO PLAYBACK EN 19
To choose whether or not the following displaysButtons And Functions
appear on the connected TV

 

 

● Date/Time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 27, 31) Or, press DISPLAY on the remote control to turn on/off the date indication.

● Time Code

Set “TIME CODE” to “ON” or “OFF”. ( pg. 27, 31) ● Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 27, 31)

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 11)

●To monitor the picture and sound from the camcorder

without inserting a tape or memory card*, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.

* GR-DX97/77/67 only

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

Playback Using The Remote Control

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 20)

Installing The Battery

A Infrared beam transmitting window

●Transmits the beam signal.

The following buttons are available only when the camcorder’s Power Switch is set to “PLAY”.

B PAUSE Button

●Pauses the tape ( pg. 20)

Up Button ( pg. 20)

C SLOW Rewind Button ( pg. 20)

D REW Button

●Rewind/Reverse Shuttle Search on a tape ( pg. 18)

●Displays previous file in a memory card* ( pg. 22)

Left Button ( pg. 20)

E INSERT Button ( pg. 40)

F SHIFT Button ( pg. 20, 41)

G DISPLAY Button ( pg. 19, 37, 42)

H SLOW Forward Button ( pg. 20)

I PLAY Button

● Starts Playback of a tape ( pg. 17)

● Starts Auto Playback of images in a memory card*

The remote control uses one lithium battery (CR2025).

1 Pull out the battery holder by pushing the lock tab.

2 Insert the battery in the holder, and be sure to have the “+” mark visible.

3 Slide the holder back in until you hear a click.

2

1

13

Lock tab

( pg. 22)

J FF Button

●Forward/Forward Shuttle Search on a tape ( pg. 18)

●Displays next file in a memory card* ( pg. 22)

Right Button ( pg. 20)

K A. DUB Button ( pg. 40)

L STOP Button

●Stops the tape ( pg. 17)

●Stops Auto Playback* ( pg. 22)

Down Button ( pg. 20)

Beam Effective Area (indoor use)

 

When using the remote control,

 

be sure to point it at the remote

 

sensor. The transmitted beam’s

 

approximate effective distance for

 

indoor use is 5 m.

 

NOTE:

Remote sensor

The transmitted beam may not be effective or may cause incorrect

operation when the remote sensor is directly exposed to sunlight or powerful lighting.

M EFFECT Button ( pg. 20)

N EFFECT ON/OFF Button ( pg. 20)

The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”.

a Zoom (T/W) Buttons Zoom in/out ( pg. 16, 20)

(Also available with the Power Switch set to “PLAY”) b START/STOP Button

Functions the same as the Recording Start/Stop Button on the camcorder.

c S.SHOT Button

Functions the same as SNAPSHOT on the camcorder. (Also available with the Power Switch set to “PLAY”)

* GR-DX97/77/67 only