Transmitted beam effective area
Remote sensor
When using the remote control, be sure to point it at the remote sensor. The illustration shows the approximate transmitted beam effective area for indoor use.
The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.
Interval timer indicator
1MIN 
1
2S
Rec time indicator
Remote sensor
START/STOP
INT. TIME
REC TIME
(provided with | (provided with |
optional for | |
FX33/FX23) |
|
EN41
FEATURE: Self-Timer, Animation and
Time-Lapse
PURPOSE:
The remote control lets you set/release Interval Timer and Rec Time functions without using the Menu Screen.
OPERATION:
Self-Timer
1)Set
Instead of performing steps 1 through 4 on pg. 32
2)Release
Instead of setting “INT. TIME” to “OFF” in the Menu, press INT. TIME on the remote control until the Interval Timer indicator disappears.
Animation
1)Set
Instead of performing steps 1 and 2 on pg. 33 (“Animation”), press REC TIME on the remote control. Each time REC TIME is pressed, the Rec Time indicator appears, changing in the following order: 1/4S, 1/2S, 1S, 5S and No indication (off).
2)Release
Instead of using the Menu in step 5 on pg. 33, press REC TIME on the remote control until the Rec Time indicator disappears.
Time-Lapse
1)Set
Instead of performing steps 1 through 3 on pg. 33
2)Release
Instead of using the Menu in step 5 on pg. 33, press INT. TIME and REC TIME on the remote control until the indicators disappear.
NOTE:
Also refer to pg. 32 and 33.
