EN49

Mode Effect

All still images stored in memory can be displayed six at a time. This mode is a
convenient way to look for the still image you want to view and to check the still
images you shot beforehand (Z pg. 50).
After doing steps 1 through 4 on pg. 48, you can run through all the still images
stored in memory automatically in numerical order. Each still image is displayed.
This mode is like a regular slide-show. If you wish to stop the slide-show, press the
Select Dial twice.
After doing steps 1 through 4 on pg. 48 you can run through all the still images
stored in memory automatically in numerical order. The still image wipes in over
the last one from the bottom of the screen to the top. If you wish to stop the slide-
show, press the Select Dial twice.
Lets you protect selected still images from accidental erasure. Select a still image for
which you want to perform “Protect” to put a padlock mark next to it. A still image
with a padlock mark cannot be deleted. When selecting a still image to protect, you
can check six still images stored in memory at a time (Z pg. 51).
Allows you to delete some still images already stored in memory (Z pg. 52).
CAUTION:
While “ENTER” is selected on the Delete Execute Menu and it is blinking, switching
off the camcorder or removing the power supply unit (battery pack or AC Power
Adapter/Charger) may cause the camcorder’s built-in memory to become corrupt.
Never remove the power supply unit at this stage.
SELECT Allows you to check 6 still images stored in memory at a time, to select
the still images you want to delete.
ALL Allows you to delete all the still images at once except protected
images.
INDEX
SLIDE SHOW 1
SLIDE SHOW 2
PROTECT
DELETE
Menu Screen Explanations