Remote sensor

ZOOM (T/W)

PLAY

STOP

RM-V715U

Display

Interval time indicator

1M I N 1 / 2S

Recording time indicator

Remote sensor

START/STOP

INT. TIME

REC. TIME

RM-V715U OR RM-V700U (optional)

EN37

Playback Zoom

To magnify the recorded image up to 10X at any time during playback.

NOTES:

●Use the RM-V715U remote control unit to perform this procedure.

●Make sure that the TBC mode is activated ( pg. 31).

1)Press PLAY to find the scene of interest.

2)Press the ZOOM Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder’s remote sensor. Pressing T zooms in.

To End Zoom . . .

.... press and hold W until magnification returns to

normal. Or, press STOP and then press PLAY.

NOTES:

●Zoom can also be used during still playback.

●Due to digital image processing, the quality of the image may suffer.

●After zooming in on a still video image, when normal playback is started, the zoomed-in effect is momentarily cancelled but then resumes, returning magnification to the previously set level.

Animation and Time-Lapse

The remote control lets you set/release Interval Time and Recording Time without using the Menu Screen.

Animation

1)Set

Instead of performing steps 1 and 2 on pg. 26

(“Animation”), press REC TIME on the remote control. Each time REC TIME is pressed, the Recording Time indicator appears, changing in the following order: 1/4S, 1/2S, 1S, 5S and no indication (off).

2)Release

Instead of using the Menu in step 5 on pg. 26, press REC TIME on the remote control until the Recording Time indicator disappears.

Time-Lapse

1)Set

Instead of performing steps 1 and 2 on pg. 26 (“Time- Lapse”), press REC TIME and INT. TIME on the remote control. Each time REC TIME is pressed, the Recording Time indicator appears, changing in the following order: 1/4S, 1/2S, 1S, 5S and no indication (off). Each time INT. TIME is pressed, the Interval Time indicator appears, changing in the following order: 15S, 30S, 1MIN, 5MIN and no indication (off).

2)Release

Instead of using the Menu in step 4 on pg. 26 (“Time- Lapse”), press REC TIME and INT. TIME on the remote control until the indicators disappear.

NOTE:

Also refer to pg. 26.