Connect the editing cable to the RM-V700U’sPAUSE-IN connector.
2 Insert a recorded tape into the camcorder and set the
Power Switch to “ ”.
3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

To S-Video output connector

S-Video cable

“Y/C”/“CVBS” video out

select switch

VCR

To J terminal

(JLIP) Open

the cover.

To Video* output and Audio output connectors

A/V cable

Editing cable

(ø3.5 mini-plug cable) (optional)

To AUDIO (L/MONO), VIDEO* and

-IN connectors

If your VCR has the SCART connector, use the cable adapter.

To Remote

PAUSE

To PAUSE-IN

EN41

MAKE CONNECTIONS

NOTE:

Set “VIDEO OUT” of the camcorder according to the system of the VCR you will be using ( pg. 9).

1 JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

Connect the editing cable to the Remote PAUSE terminal.

JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR

Connect the editing cable to the R.A.EDIT connector.

VCR OTHER THAN TYPE OR

NOTES:

●If your VCR has an S-Video input connector or a SCART connector compatible with Y/C signals, connect the camcorder and the VCR using the provided S-Video cable. This can improve the dubbed picture quality.

●If you use the cable adapter, set the “Y/C”/“CVBS” video out select switch as required.

Y/C

: When connecting to a VCR which accepts Y/C

 

signals and uses an S-Video cable.

CVBS

: When connecting to a VCR which does not

 

accept Y/C signals and uses an A/V cable.

●If you are using a SECAM VCR, set “VIDEO OUT” to “SECAM” ( pg. 9).

TV

RM-V700U

(optional)

*Connect when an S-Video cable is not used.

CONTINUED ON NEXT PAGE.