JVC GR-SXM26EA, GR-SXM260A, GR-SX210A, GR-SX21EA, GR-SXM460A Playback Basic Playback, Darken

PLAYBACK Basic Playback

Power Zoom Lever (VOL.*)

Speaker*

Select Wheel	Set to “PLAY”.
(BRIGHT*)
	Rewind (2) Button
	Fast-Forward (3) Button
	Play/Pause (4/6) Button
	Stop (5) Button

*GR-SXM460A/SXM260A/SXM46EA/SXM26EA only

EN33

1 Load a tape (
pg. 11).

2 Set the Power Switch to “PLAY”. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2 to rewind, or 3 to fast-forward the tape during Stop mode.

NOTES:

●The camcorder shuts off automatically after about

5 minutes in Stop mode. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.

●When the Power Switch is set to “PLAY” and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power (GR-SXM460A/ SXM260A/SXM46EA/SXM26EA only).

●The playback picture can be viewed in the viewfinder

(with the LCD monitor* shut), on the LCD monitor* or on a connected TV (
pg. 36, 37).

*GR-SXM460A/SXM260A/SXM46EA/SXM26EA only.

●You can also view the playback picture on the LCD monitor with it flipped over and retracted (GR- SXM460A/SXM260A/SXM46EA/SXM26EA only).

●If a blank portion on the tape is played back, the screen may become black. This is not a malfunction.

LCD Monitor Brightness Adjustment (GR-SXM460A/SXM260A/SXM46EA/ SXM26EA only): Rotate the Select Wheel (BRIGHT) towards “+” to brighten, or towards “–” to

darken.

●The Bright Level Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode (
pg. 25).

Speaker Volume Control (GR-SXM460A/SXM260A/SXM46EA/SXM26EA only):

Slide the Power Zoom Lever (VOL.) towards “+” to turn up the volume, or towards “–” to turn down the volume.

●The Speaker Volume Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode (
pg. 25).

Still Playback: Pauses during playback.

1)Press 4/6 during playback.

2)To resume normal playback, press 4/6 again.

●Noise bars will appear and the picture will become monochrome during Still Playback.

●If TBC (
pg. 34) is engaged, noise bars will not appear. This mode is called Fine Still (GR-SXM460A/ SXM46EA only).

Shuttle Search: Allows high-speed search in either direction.

1)Press 3 for forward or 2 for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●Noise bars appear and pictures may become monochrome or darken during Shuttle Search. This is normal.