23
ADVANCED FEATURES
Night-Alive (GR-SXM967, GR-SXM367 only)
Makes dark subjects or areas even brighter than
they would be under good natural lighting.
1)Set the Power Switch @ to “ ” or “ ” while
pressing down the Lock Button ! located on the
switch.
2)Press NIGHT q repeatedly until the desired
mode appears.
A NIGHT AUTO: The shutter speed is
automatically adjusted (maximum 0.4 sec.).
1 NIGHT 20X (only when the Power Switch @
is set to “ ”): The shutter speed is set to 0.3
second to provide 20 times the sensitivity.
2 NIGHT 60X (only when the Power Switch @
is set to “ ”): The shutter speed is set to 1 second
to provide 60 times the sensitivity.
LIGHT (only when the Power Switch @ is
set to “”): The camcorder’s light is on and the
shutter speed is automatically adjusted (maximum
0.4 sec.).
•To cancel the effect, press NIGHT q repeatedly
until “OFF” appears.
•During Night-Alive, the following cannot be
activated: “Picture Stabiliser”, “Programme AE
With Special Effects”, “Digital Effects” and “S.LX”
in SYSTEM MENU ( pg. 20).
•Night-Alive does not work when the Video Light
mode is set to “AUTO” or “ON” ( pg. 13, “Video
Light”).
•During Night-Alive, it may be difficult to bring the
camcorder into focus. To prevent this, use of a
tripod is recommended.

Fade/Wipe Effects

Fade- or wipe-in works at recording start, and fade-
or wipe-out works at recording end.
1)Set the Power Switch @ to “ ” while pressing
down the Lock Button ! located on the switch.
2)Press FADE/WIPE w repeatedly until the
desired mode appears.
3)Press the Recording Start/Stop Button 0 to
activate fade-in/out or wipe-in/out.
•Pressing and holding the Recording Start/Stop
Button 0 allows you to vary the length for the
image during fade in/out or wipe in/out.
•To cancel a fade or wipe, press FADE/WIPE w
repeatedly until “OFF” appears.
FADER: Fades in/out to a black screen.
MOSAIC (Fader): Gradually turns/returns the
picture into/from a mosaic pattern.
SHUTTER (Wipe): A black screen moves in
from the top and bottom, closing over the image
like a shutter, or a new image pushes open the
black screen vertically from the centre.
SLIDE (Wipe): A black screen moves in from
the left to gradually cover the image, or a new
image moves in from right to left.
DOOR (Wipe): Wipes in as the two halves of
a black screen open to the left and right, revealing
the scene, or wipes out and the black screen
reappears from left and right to cover the scene.
CORNER (Wipe): Wipes in on a black screen
from the upper right to the lower left corner,
revealing the scene, or wipes out from lower left to
upper right, leaving a black screen.
WINDOW (Wipe): Wipes in on a black screen
from the centre of the screen towards the corners,
revealing the scene, or wipe out from the corners
to the centre, leaving a black screen.
GR-SXM967-EN 3/11/03, 10:33 AM23