27
Audio Dubbing
You can record a new soundtrack on a prere-
corded tape (normal audio only). The sound is
recorded from the built-in microphone.
Perform steps 1) and 2) of the Insert Editing
procedure ( pg. 26).
3)Press REW T to go a little beyond the beginning
of the scene onto which you want to dub the new
audio, press PLAY R to view the recorded tape,
then press PAUSE a at exactly the point where
dubbing should start.
4)While holding down A. DUB s, press and
release PAUSE a.
5)To begin Audio Dubbing, press PLAY R. When
the counter reaches “0:00:00”, Audio Dubbing
stops automatically and the camcorder enters
the Audio Dub-Standby mode. To end Audio
Dubbing, press STOP Y.
•Do not press REW T or FF P during Audio Dub-
Standby, or the edit points will not be accurate.
•If the microphone is too close to the TV, or if the
TV’s volume is too high, whistling or howling may
occur.
For Insert Editing/Audio Dubbing
•Insert Editing and Audio Dubbing may not work
correctly if the tape contains blank segments, or if
the recording speed was changed during the
original recording.
•To edit/dub onto a tape, make sure the erase
protection tab is in the position that allows
recording.
•Do not press STOP Y during Insert Editing or
Audio Dubbing, or the edit points will not be
accurate.
GR-SXM967-EN 3/11/03, 10:33 AM27