JVC GR-SXM47 specifications 24EN, Recording, AdvancedFeaturescont, SYSTEM MENU cont

24EN

RECORDING

AdvancedFeatures(cont.)

SYSTEM MENU (cont.)

S-VHS*(S-VHS	ON	Records in S-VHS on a VHS or S-VHS cassette (☞ pg. 10).
ET*) (GR-SXM47/
	OFF	Records in VHS on a VHS or S-VHS cassette (☞ pg. 10).
SX22 only)
TAPE LENGTH	Allows you to set the tape length depending on the tape used (☞ pg. 12).
DISPLAY	FULL	Make all of the indications appear on the LCD monitor**/
		viewfinder during playback or recording.
	SIMPLE	Make the following indications disappear from the LCD
		monitor**/viewfinder during recording or playback: cassette
		warning, tape remaining time, battery pack remaining power
		indicator and tape length indicator (☞ pg. 44, 45)
REC TIME	Refer to “Animation” and “Time-Lapse” (☞ pg. 26).
INT. TIME	Refer to “Time-Lapse” (☞ pg. 26).
TELE MACRO	OFF	Usually the distance to a subject where the lens is in focus
		depends on the zoom magnification. Unless there is a distance of
		more than 1 m to the subject, the lens is out of focus at the
	ON	maximum telephoto setting. When set to “ON”, you can shoot a
		subject as large as possible at a distance of approx. 60 cm.
		•Depending on the zoom position, the lens may go out of focus.
TITLE LANG.	Allows you to select the language (ENGLISH or FRENCH) of Instant Titles
	(☞ pg. 25).
DATE/TIME	Allows you to set the current date and time (☞ pg. 9).
JLIP ID NO.	This number is necessary when connecting the camcorder to a device such as a computer
	using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
DEMO MODE	ON	Demonstrates certain functions automatically. When “DEMO
		MODE” is set to “ON” and the Menu Screen is closed, the
		demonstration starts.
		Operating the Power Zoom Lever during the demonstration
		stops the demonstration temporarily. If the Power Zoom Lever is
		not moved for more than 1 minute after that, the demonstration
		will resume.
		NOTE:
		When a tape whose Erase Protection tab is in the position that
		allows recording is loaded in the camcorder, demonstration is
		not available.
	OFF	Automatic demonstration will not take place.

*S-VHS ET is displayed when a VHS cassette is loaded, and S-VHS is displayed when an S-VHS cassette is loaded (☞ pg. 10). If a cassette is not loaded, “S-VHS” will be displayed in the Menu Screen.

S-VHS ET is preset to “OFF”.

**Models equipped with LCD monitor only.

: Factory-preset