JVC GR-SXM47 specifications 30 EN, Load a tape pg Set the Power Switch to

30EN

PLAYBACKBasicPlayback

Stop (5) Button

Rewind (2) Button

Play/Pause ( 4/6) Button

Fast-Forward ( 3) Button

BRIGHT* Wheel

Power Zoom

Lever (VOL.*)

Speaker*

Set to “ ”.

*Models equipped with LCD monitor only.

1 Load a tape (☞ pg. 13).

Set the Power Switch to “	”.
2 To start playback, press 4/6.
•To stop playback, press 5.

•Press 2to rewind, or 3to fast-forward the tape during Stop mode.

NOTES:

●The camcorder shuts off automatically after about

5 minutes in Stop mode. To turn on again, set the Power

Switch to “OFF”, then to “ ”.

●When the Power Switch is set to “ ” and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power (models equipped with LCD monitor only).

●The playback picture can be viewed in the viewfinder

(with the LCD monitor* shut), on the LCD monitor* or on a connected TV (☞ pg. 32, 33).

*Models equipped with LCD monitor only.

●You can also view the playback picture on the LCD monitor with it flipped over and retracted (models equipped with LCD monitor only).

●If a blank portion on the tape is played back, the screen may become black. This is not a malfunction.

LCD Monitor Brightness Adjustment (models equipped with LCD monitor only):

Rotate BRIGHT towards “+” to brighten, or towards “–” to darken.

●The Bright Level Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode (☞ pg. 23).

Speaker Volume Control (models equipped with LCD monitor only): Slide the Power Zoom Lever (VOL.) towards “+” to turn up the volume, or towards “–” to turn down the volume.

●The Speaker Volume Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode (☞ pg. 23).

Still Playback: Pauses during playback.

1)Press 4/6during playback.

2)To resume normal playback, press 4/6again.

●Noise bars will appear and the picture will become monochrome during Still Playback.

Shuttle Search: Allows high-speed search in either direction.

1)Press 3 for forward or 2 for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●Noise bars appear and pictures may become monochrome or darken during Shuttle Search. This is normal.