JVC GR-SXM720 specifications After Use, Cleaning The Camcorder, EN45

USERMAINTENANCE

LENS COVER Open/Close Ring

EN45

After Use

BATTERY RELEASE

Set to “OFF”.

			Remove.
PUSH	Button	EJECT	Switch

1 Turn off the camcorder.

2 Open the LCD monitor fully. Slide EJECT to open the cassette holder, then remove the cassette.

3 Press PUSH to close and lock the cassette holder.

4 Close and lock the LCD monitor.

5 Slide BATTERY RELEASE to remove the battery pack.

6 Turn the LENS COVER Open/Close Ring to close the lens cover.

Cleaning The Camcorder

1 To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

2 Open the LCD monitor and wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3 To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper.

4 To detach the eyepiece, turn it counterclockwise and pull it out.

5 Remove dust from the viewfinder using a blower brush.

6 Re-attach the eyepiece and turn it clockwise.

NOTES:

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mold may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth refer to the cautions of each product.

●When removing the eyepiece, be sure to hold the viewfinder securely.