Care and cleaning
27
| General |
| |
| Clean your dishwasher regularly for best performance and |
| |
| to reduce the risk of problems occurring. | 2 | |
| Always disconnect the dishwasher plug from the power |
| |
| outlet and turn off the water supply before cleaning. | Main filter plate | |
| Use a gentle household cleaner for the outside and the |
| |
| door seals. | 1031 | |
| Clean the control panel only with a clean moist cloth. | ||
| 3 | ||
|
| ||
| Cleaning the filters |
| |
| Clean the filters and spray arms regularly. Dirty filters will |
| |
| have a negative effect on the cleaning results. |
| |
| To remove the filters (Fig. 27) | Tongues | |
1 | Remove the lower basket from the dishwasher. | 4 | |
2 | Twist the filter cylinder anticlockwise to unlock the | ||
Filter cylinder | |||
| bayonet mechanism and pull it up and out . |
| |
3 | Remove the main filter plate, as shown. |
| |
4 | Press on the two tongues at the top of the cylinder and |
| |
| remove the coarse filter from the micromesh filter. |
| |
5 | Clean all three filters thoroughly under running water. Use |
| |
| a brush if necessary. |
|
6 | Replace the main filter plate. | Coarse filter |
7 | Reassemble the filter cylinder and place it back into the |
|
| hole in the main filter plate. Twist clockwise until it clicks |
|
| into place and the arrows on the cylinder and the main | Micromesh filter |
| filter plate align. | |
|
| |
| Cleaning the spray arms | Fig. 27 Removing the filters |
| We recommend cleaning the spray arms on a regular | 2 |
| Lower spray arm | |
| basis, to remove food particles that may block | |
|
| |
| the nozzles. |
|
| To remove the spray arms (Fig. 28) |
|
1 | Remove the lower basket from the dishwasher. |
|
2 | Remove the lower spray arm by pulling it upwards, as |
|
| shown. |
|
3 | Loosen the locking nut of the upper spray arm by |
|
| twisting it clockwise and remove the spray arm by pulling |
|
| downwards, as shown. | 3 |
4 | Clean the spray arms under running water. | |
5 | Replace the spray arms, ensuring that the locking nut of | Upper spray arm |
| the upper spray arm is fastened tight and the lower spray | Locking nut |
| arm clicks into place. | |
| Fig. 28 Removing the spray arms | |
|
|
