20
Loading the dishwasher
To adjust the height of a cup rack (Fig. 14)
To adjust the height of a cup rack, follow steps 1 to 3 above, then lower the rack back into a horizontal position, making sure that you keep it at the uppermost point of the wire support. The two plastic tabs on the back of the cup rack will sit on a support wire, keeping the rack securely in place.
After adjusting the height, check that the spray arm can still move freely.
1 
34
2
Gripping hooks
4
Fig. 13 Folding away a cup rack
Plastic tabs | 3 |
1
2
Fig. 14 Adjusting the height of a cup rack
Using the bottle support
Use this to give tall bottles extra stability during a wash programme. To remove, press the gripping wire feet apart so that they unhook from the basket wires, as shown in Fig.15.
1020
Fig. 15 Removing the bottle support
