Using your dishwasher 13
Cancelling a wash programme after the keylock has been automatically activated
1Deactivate the keylock (see instructions above).
2When the display shows KEY LOCK DEACTIVATED, press the button until PAUSED is displayed.
3 Keep the button held down while the display counts down: CANCEL 5.. 4.. 3.. 2.. 1
4When CANCEL appears on the display by itself, release the button.
The word CANCELLING will flash on the display for 45 seconds, followed by CANCELLED and a short tune.
5Now you may either turn the dishwasher off by pressing the button or press the button to start a new wash programme.
Note: cancelling a wash programme before it is complete may result in detergent staying in the machine and on the dishes.
Selecting a different language
Your dishwasher is preset to display its messages in English, but you can select from ten additional languages if you wish to.
1Enter the language selection menu
Make sure your dishwasher is turned on but there is no wash programme running. Deactivate the keylock if necessary (see instructions above).
Open the door.
With the door open, press the button. The display will show LANGUAGE SETTINGS.
Keep the button held down while the display counts down: LANGUAGE SETTINGS 10..9........2..1
When the currently set language (eg ENGLISH) appears in the display, release the button.
2Select a different language
Scroll through the languages by
When the display shows the language you want (eg ITALIANO) press and hold the button for 5 seconds until STORED is displayed.
3Exit the language selection menu
Turn the dishwasher off by pressing the | button. | ||
Turn the dishwasher back on by pressing the |
| button. | |
|
Note: while the door is open, the keylock will not be activated and you will not be able to cancel a wash programme.