JVC GR-SXM937UM specifications Recording Mode Setting, Set depending on your preference

14ENGETTINGSTARTED

Recording Mode Setting

(cont.)

System

Select Switch

Select Wheel

SP/EP Recording

Mode Button

	Set depending on your preference.
	Set the System Select Switch to “VIDEO”, then set the
	1 Power Switch to “AUTO” or “PRO.”. Press SP/EP for
	more than 1 second. “SP” (Standard Play) provides
	higher picture and sound quality and is better for
	dubbing, while “EP” (Extended Play) is more
	economical, providing three times the recording time.
	NOTE:
Power Switch	If the recording mode is switched during recording, the
	playback picture will be blurred at the switching point.

MENU Button

Viewfinder
SP	T 3 0	Tape length indicator
		Recording mode
		indicator
Display
T EL E MACRO	OF F
TAPE L ENGTH	T 3 0	Menu Screen
P I CTURE	S TANDARD
SNAPSHOT	FUL L
4RE TURN
TAPE L ENGTH		TAPE LENGTH
T 2 0		Setting Menu
T 3 0

T 3 5

T 4 0

EX I T

T EL E MACRO OF

Tape Length Setting

Set the tape length according to the length of the tape used.

1 Set the Power Switch to “PRO.”, then press MENU.

2 Rotate the Select Wheel to move the highlight bar to “TAPE LENGTH”, then press it. The TAPE LENGTH Setting Menu appears.

3 Rotate the Select Wheel to move the highlight bar to the correct tape length setting. T20=20 minutes of recording time, T30=30 minutes, T35=35 minutes, and T40=40 minutes (in SP).

•To return to the previous setting, rotate the Select Wheel to move the highlight bar to “EXIT”.

4 Press the Select Wheel. The Menu Screen reappears with the highlight bar on “RETURN”. Press the Select Wheel again to close the Menu Screen.

NOTE:

TAPE L ENGTH	T 4 0
P I CTURE	S TANDARD
SNAPSHOT	FUL L
4RE TURN

The tape remaining time (☞ pg. 18) displayed in the viewfinder is correct only if the correct tape length has been selected.