JVC GR-X5AA, GR-X5AC, GR-X5AG, GR-X5AH Power, Charging the Battery Pack, Using the Battery Pack, BATT. RELEASE, GETTING STARTED, To detach the battery pack, Maximum continuous recording time

Connect the AC adapter to the camcorder.

Set the power switch to “OFF”.

				GETTING STARTED		EN 13
	Power
			Battery pack		Charging time
			BN-VF707U*		Approx. 1 hr. 30 min.
This camcorder’s 2-way power supply system
			BN-VF714U		Approx. 2 hr. 40 min.
lets you choose the most appropriate source of
power. Do not use provided power supply units			BN-VF733U		Approx. 5 hr. 40 min.
with other equipment.
		*	Provided

Charging the Battery Pack

POWER/CHARGE

Lamp

Power Switch

A

Open the cover.

	mark
	To DC connector	Arrow
To AC outlet
	Battery pack
AC Adapter	Battery pack
	mount
(ex. AP-V17E)
	BATT. RELEASE

1

2 With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount.

●If the battery mount cover is attached, remove it by sliding BATT. RELEASE.

3 Slide up the battery pack until it locks in place.

4

5 Connect the power cord to the AC adapter. (AP-V14E, AP-V14AC only)

6 Plug the AC adapter into an AC outlet. The POWER/CHARGE lamp on the camcorder blinks to indicate charging has started.

7 When the POWER/CHARGE lamp goes out, charging is finished. Unplug the AC adapter from the AC outlet. Disconnect the AC adapter from the camcorder.

To detach the battery pack

While sliding BATT. RELEASE, remove the battery pack.

NOTES:

●This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BN- VF707U/VF714U/VF733U battery packs. Using generic non-JVC batteries can cause damage to the internal charging circuitry.

●If the protective cap is attached to the battery pack, remove it first.

●Make sure to use the battery pack with the arrow () mark. The camcorder does not turn on with the battery mount cover without the arrow () mark.

●When charging the battery pack for the first time or after a long storage period, the POWER/ CHARGE lamp may not light. In this case, remove the battery pack from the camcorder, then try charging again.

●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.

●Since the AC adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●Using the optional AA-VF7 battery charger, you can charge the BN-VF707U/VF714U/VF733U battery pack without the camcorder.

●After 5 minutes has elapsed in record-standby mode with the cassette inserted, the camcorder will automatically turn off its power supplied from the AC adapter. In this case, the battery charge starts if the battery is attached to the camcorder.

Using the Battery Pack

Perform steps 2 – 3 in “Charging the Battery Pack”.

Maximum continuous recording time

	Battery pack	Recording time
	BN-VF707U*	45 min. (55 min.)
	BN-VF714U	1 hr. 35 min. (1 hr. 55 min.)
	BN-VF733U	3 hr. 45 min. (4 hr. 35 min.)
*	Provided
(	): When LCD backlight is off.

GETTING STARTED

CONTINUED ON NEXT PAGE