|
| MENUS FOR DETAILED ADJUSTMENT | EN 35 | ||||
|
|
|
|
|
| ||
|
|
|
|
| SYSTEM |
| |
[OFF] / ON |
|
|
| ||||
|
|
|
5S
[OFF]: Disables
5S: Enables
Anim.: Allows you to record a few frames only. By using an inanimate object and changing its position between shots, you can record the subject as though it is moving.
TELE MACRO[OFF]: Disables the function.
ON: When the distance to the subject is less than 1 m, set “TELE MACRO” to “ON”. You can shoot a subject as large as possible at a distance of approx. 70 cm.
NOTE:
Depending on the zoom position, the lens may go out of focus.
WIDE MODE[OFF]: Records with no change in the screen ratio. For playback on a TV with a normal screen ratio.
CINEMA*: Inserts black bands at the top and
bottom of the screen. The |
| indicator appears. |
During playback on
16:9 WIDE*: For playback on TVs with an aspect ratio of 16:9. Naturally expands the image to fit the screen without distortion. The
indicator appears. When using this mode, refer to your
*Available only when the VIDEO/MEMORY switch is set to “VIDEO”.
The “s SYSTEM” functions which are set when the power switch is set to “M” are also applied when the power switch is set to “PLAY”.
[ ] =
OFF: Even though not heard while shooting, shutter sound is recorded on the tape. BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording. It also activates the shutter sound effect. ( pg. 25, 39)
[MELODY]: Instead of a beep, a melody sounds when any operation is performed. It also activates the shutter sound effect.
TALLYOFF: The tally lamp remains off at all times.
[ON]: The tally lamp comes on to signal the start of recording.
REMOTEOFF: Disables the remote control operations.
[ON]: Enables the remote control operations.
NOTE:
During playback/recording on 4:3 TVs/LCD monitor, black bands are inserted at the top and bottom of the screen and the image appears like a letter boxed 16:9 movie. (CINEMA and 16:9 WIDE mode)
WIND CUT[OFF]: Disengages the function.
ON : Helps cut down on noise created by wind. The “ ” indicator appears. The quality of the sound will change. This is normal.
FLASH ADJ.