50 EN

EDITING

 

 

 

 

 

 

 

 

 

 

 

Audio Dubbing

NOTES:

 

 

 

 

 

 

 

 

 

 

 

 

 

● When editing onto a tape that was recorded at

The audio track can be customized only when

12-BIT, the old and new soundtracks are recorded

recorded in the 12-BIT and SP modes.

separately.

● If you dub onto a blank space on the tape, the

( pg. 34)

 

 

 

 

 

 

 

 

 

 

 

 

sound may be disrupted. Make sure you only edit

● Use the provided remote control.

recorded areas.

 

 

 

 

 

 

 

 

 

 

 

 

 

Stereo Microphone

● If feedback or howling occurs during TV playback,

 

 

move the camcorder’s microphone away from the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PAUSE

TV, or turn down the TV’s volume.

 

 

 

 

 

 

 

 

 

 

● If you change from 12-BIT to 16-BIT in mid-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PLAY

recording and then use the tape for audio

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STOP

dubbing, it is not effective from the point where

 

 

 

 

 

 

 

 

 

 

A.DUB

 

 

 

 

 

 

 

 

 

 

16-BIT recording began.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Microphone connector

● During audio dubbing, when the tape moves to

 

 

 

 

 

 

 

 

scenes recorded in the LP mode, scenes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

recorded in 16-BIT audio or a blank portion, audio

 

 

 

 

 

 

 

 

 

 

 

Speaker

 

 

dubbing stops.

Headphone connector

 

 

 

 

 

 

 

 

 

 

 

● Audio dubbing is also possible using an optional

1 Play back the tape to locate the point where

microphone connected to the microphone

connector.

editing will start, then press PAUSE (9).

● While an optional microphone is connected, the

2 While holding A. DUB (D) on the remote

built-in microphone is disabled.

● To perform audio dubbing with a video unit

control, press PAUSE (9). The “9D” and “MIC”

connected to the camcorder’s S/AV connector,

indicators appear.

 

 

 

 

 

 

 

 

 

 

 

 

first set “S/AV INPUT” to “A/V IN” or “S IN” in

3 Press PLAY (U), then begin “narrating”.

VIDEO menu. ( pg. 33, 38)

Speak into the microphone on the camcorder.

The “AUX” indication appears instead of “MIC”.

●To pause dubbing, press PAUSE (9).

4 To end audio dubbing, press PAUSE (9), then STOP (8).

To hear the sound during audio dubbing Connect optional headphones to the headphone connector or use the S/AV connector, and set the “NARRATION” to the desired mode

( pg. 33, 37);

●“OFF” for the playback sound.

●“ON” for the dubbed sound.

●“MIX” for the playback and dubbed sound.

To hear the dubbed sound during playback

Set “NARRATION” to “ON” or “MIX”.

( pg. 33, 37)