JVC GVT0001-002A Connecting the SUB Woofer, Connecting a VCR, Laying Out the Unit, Right speaker

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Connecting the Speakers (Please refer to instructions for speakers as will when you connect speakers.)

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the CA-D622T and the other end to the speaker.

1.Open each of the terminals and insert the speaker wires firmly (be sure to remove the insulation at the end of each wire first), then close the terminals.

2.Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the CA-D622T.

Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–) terminals marked LEFT on the CA-D622T.

	SPEAKERS
Laying Out the Unit	RIGHT	LEFT
	+	+
COMPACT COMPONENT SYSTEM	–	–

3 DISC

Right speaker Left speaker

	MX-D622T
	CD
	FM/AM
POWER	TAPE
	VCR

			1	2	3
A	AUTO REVERSE	AUTO REVERSE	B

English

1 cm (7/16”) 1 cm (7/16”)

Leave a space of at least 1 cm on both sides of the Unit and at least 10 cm at the back, for ventilation.

IMPORTANT: Use speakers with the correct impedance only. The correct impedance is indicated on the back panel.

CAUTION: If a TV is installed near speakers, the TV may display irregular colors. In this case, set the speakers away from the TV.

Connecting the SUB WOOFER

Connect the Sub-Woofer to the SUBWOOFER OUT terminal.

SUBWOOFER

OUT

Connecting a VCR

Connect the VCR to the VCR terminal.

VCR

RIGHT LEFT

IN

(PLAY)

OUT

(REC)

AUDIO OUT AUDIO IN

Now you can plug the AC power cord into the wall outlet, and your CA-D622T is at your command!

5