JVC GVT0001-002A manual Music Scan, Other Useful Features of the Cassette Deck, Reverse Mode on

Music Scan

To find the beginning of a music track during play, use the Music Scan function. Music Scan searches for blank portions that usually separate selections, then plays the next selection.

To Find the Beginning of the Current Selection —————————————

Press the 1or Ábutton during play.

❏Make sure that you press the 1 or Ábutton in the opposite direction to that in which the tape is playing. Searching stops at the beginning of the current selection, and the current selection starts automatically.

To Find the Beginning of the Next Selection ——————————————

Press the 1or Ábutton during play.

❏Make sure that you press the 1 or Ábutton in the same direction as that in which the tape is playing. Searching stops at the beginning of the next selection, and the next selection starts automatically.

Music Scan works by detecting a 4-second long blank at the beginning of each selection, so it won’t work well if your tape has:

•No blank at the beginning of a selection .

•Noise (often caused by much use or poor quality dubbing) which fills the blank with noise.

•Long, very soft passages or pauses in a selection. The scan will detect these as 4-second long blanks. If this happens, just scan again until you reach the selection you want.

Other Useful Features of the Cassette Deck

❏Use Reverse Mode to make the tape automatically reverse at the end of a side and start playing

REVERSE	the other side. Press the REVERSE MODE button to change from Reverse Mode on to Reverse
MODE	Mode off, or from off to on.

English

DOLBY B

NR

Reverse Mode ON Reverse Mode OFF

❏Continuous Play: With the Reverse Mode indicator on, when tape playback in the 2direction finishes, the Unit always checks to see if a tape is in the other deck. If there is, it automatically starts playing. This Continuous Play function works regardless of which deck starts first.

❏Press the DOLBY B NR button to switch Dolby B Noise Reduction on (the indicator lights up) or off (the indicator goes off). If a tape is recorded with the Dolby B NR system, playing it back with the Dolby NR on will reduce tape noise and improve the clarity of the sound.

Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.

“DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

23