•DO NOT connect speakers while the power is on.
•DO NOT connect more than one speaker to each speaker teminal.
IMPORTANT: Use only speakers with the same speaker impedance as shown on the speaker terminals on the rear of the unit.
To remove the speaker grilles
The speaker grilles are removable.
Holes
Projections
Speaker grille
To remove the speaker grille, insert your fingers at the top of the speaker grille, pull towards you. Then pull the bottom towards you.
To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.
Connecting Other Equipment
To connect an audio equipment
You can connect audio
• DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.
|
| R | L |
| R | AUX |
|
|
|
| |
| L |
|
|
To audio output | L | Audio |
|
|
|
| |
| R | equipment |
|
|
|
|
English
For playing other equipment through this unit, connect between the audio output jacks on the other equipment and AUX jacks by using audio cords (not supplied).
To connect a TV set
You can connect a TV with a video input jack: used as a monitor for video CD playback.
| ANTENNA |
|
|
|
|
| AM EXT |
| R | L | |
|
| AM LOOP |
| ||
|
|
|
| AUX |
|
|
| FM 75 |
|
|
|
|
| COAXIAL |
|
|
|
Auxiliary Equipment |
|
|
|
|
|
To video input | TV |
|
|
|
|
|
|
|
|
| |
| VOLTAGE |
|
|
|
|
| SELECTOR | RIGHT | LEFT | RIGHT | LEFT |
| 230V |
|
|
|
|
| 220V |
|
|
| |
| 127V |
|
|
|
|
|
| 110V |
|
|
|
|
| MAIN SPEAKERS | SUBWOOFERS | ||
|
| CAUTION: SPEAKER IMPEDANCE 6 | - 16 | ||
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
VOLTAGE
SELECTOR
230V
Voltage mark
127V
110V
Use a screwdriver to rotate the voltage selector so the voltage number the voltage mark is pointing at is the same as the voltage where you are plugging in the unit. (See the back cover page.)
DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
Now, you can plug the AC power cord.
•If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.
IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet.
8
