JVC GVT0125-003A manual Time Search, Repeat

5 Finish the setting.

Pop-up window goes off.

To cancel Repeat Play, select “OFF” in step 4.

To erase the on-screen bar

Time Search

You can move to a particular point by specifying the elapsed playing time from the beginning.

1While playing (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu.

•Except for DVD: Time Search can be used before starting playback.

2Select .

3Display the pop-up window.

DVD-VIDEO 8.5Mbps		DISC 2	TITLE 2	CHAP 3	TOTAL 1:01:58
TIME	OFF	CHAP.	1/3	1/ 3	1/1
	TIME	_ : _ _ : _ _

	4 Enter the time.
A-B Repeat	You can specify the time in hours/minutes/seconds.

1While playing, display the on-screen bar with the pull- down menu.

2Select OFF .

3Display the pop-up window.

DVD-VIDEO 8.5Mbps		DISC 2	TITLE 2	CHAP 3	TOTAL 1:01:58
TIME	OFF	CHAP.	1/3	1/ 3	1/1

Examples:

To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.

To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.

		OFF
4	Select “A-B”.							• It is always required to enter the hour digit (even “0”
								hour), but it is not required to enter trailing zeros (the
	DVD-VIDEO 8.5Mbps		DISC 2	TITLE 2	CHAP 3	TOTAL	1:01:58	last two digits in the examples above).
								• To correct a misentry, press cursor 2 to erase the last
	TIME	OFF	CHAP.	1/3	1/ 3		1/1
								entry.
		A–B
							5	Finish the setting.

5 Select the start point (A).

The System starts playing from the specified time.

DVD-VIDEO 8.5Mbps		DISC 2	TITLE 2 C
TIME	A-	CHAP.	1/3

6 Select the end point (B).	To erase the on-screen bar
A-B Repeat starts. The selected

portion plays repeatedly.

Before pressing ENTER, you can search for the end point using ¡.

33