Step
3: Hook Up
If you need more detailed information, see page 6.
Turn the power off to all components before connections.
Illustrations of the input/output terminals below are typical examples.
When you connect other components, refer also to their manuals since the terminal names actually printed on the rear may vary.
AM loop antenna (supplied)
Turn it until the best reception is obtained.
VIDEO INPUT
TV
VIDEO INPUT
Y
PB
PR
MD recorder,
Amplifier etc.
OPTICAL
DIGITAL IN
Digital audio equipment
Green |
| |
Blue | SCART cord (not supplied) | |
Red | • This connection only sends the video signals | |
(Composite, Y/C, or RGB). | ||
| ||
| Component video cord (not supplied) | |
| AV COMPU LINK terminal | |
| • For future use. |
Optical digital cord (not supplied)
To a wall outlet
Plug the AC power cord only after all connections are complete.
4
