Inserting an SD Card
Insert a commercially available SD card before recording.
This unit comes with two SD card slots. When two SD cards are inserted and “SEAMLESS RECORDING” in the “RECORD SETTING” menu is set to “ON”, recordings can be continued on the other card even if one card is full or error occurs on one card.
Set the “STANDBY/ON OFF” switch to “OFF”.
Open the door.
Slide the “DOOR LOCK” lever to the left, and pull the door towards you.
Insert an SD card into slot A.
Label 
※Turn off the power of this unit before inserting or removing a SD card.
Close the door.
After closing the door, slide the “DOOR LOCK” lever to the right to lock the door.
.
oTo remove the card
Push the card inward once, then pull it out straight.
Memo 
Operations are confirmed on the following SD cards.
Manufacturer | Panasonic, TOSHIBA, SanDisk |
Video A | Class 4 or higher compatible SD card (2 GB)/ |
| Class 4 or higher compatible SDHC card (4 GB to 32 GB)/ |
| Class 4 or higher compatible SDXC card (48 GB to 128 GB) |
| 0 When recording with video quality “UXP”, Class 6 or |
| higher is recommended. |
| 0 When recording in progressive format (60p), Class 6 or |
| higher is required. |
Still Image B | SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) / |
| SDXC card (48 GB to 128 GB) |
0Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss.
0This unit is not guaranteed to operate with all SD cards, even when using the ones specified above. Some SD cards may not work due to specification changes, etc.
0To protect the data, do not touch the terminals of the SD card.
0When using an SDXC card, check its compatibility with the OS of your computer by referring to the Detailed User Guide.
10