Charging the Battery Pack
Set the “STANDBY/ON OFF” switch to “OFF”.
Connect the DC connector and plug in the power.
TT.1 BATT.2
REMOTE
Charging Lamp1, 2 Charging in progress:
Attach the battery pack.
Align the terminal of the battery pack with this unit.
AV
Blinks
Charging finished: 
Goes out
DC
Either BATT.1 or BATT.2 can be charged.
If two battery packs are attached, BATT.1 is charged first. After the charging of BATT.1 is completed, BATT.2 is charged. However, if BATT.1 is attached while BATT.2 is being charged, BATT.1 will be charged after the charging of BATT.2 is completed. Both battery packs cannot be charged at the same time.
.
0The battery pack is not charged at the time of purchase.
0To detach the battery pack, press the battery lock release button, and slide the battery pack out of this unit.
.
8