Troubleshooting
If you encounter problems with this unit, check the following before requesting service. 1 Refer to “Trouble” below.
2Refer to the “Troubleshooting” section in the “Detailed User Guide”.
If you have difficulties operating the unit, refer to the detailed descriptions in the “Detailed User Guide”.
3This unit is a
In such a case, reset the unit. A Turn off the power.
BRemove the AC adapter and battery pack from this unit, reattach them, turn on the power.
4 If the above do not solve the problem, consult your nearest JVC dealer or JVC service center.
Trouble
Power supply
Recording
Trouble
POWER/CHARGE lamp starts blinking when the power is turned off.
Recording cannot be performed.
Recording stops automatically.
Unable to record properly in the Intelligent Auto mode.
|
| Action | Page |
|
|
|
|
| 0 | The battery pack is being charged. | 8 |
|
|
|
|
|
|
|
|
| 0 | Check the A/Bbutton. | 13 |
| 0 | Set to the recording mode by tapping | 16 |
|
| the “<<CAM” button. |
|
|
|
|
|
| 0 | Turn off this unit, wait for a while, and | - |
|
| turn it on again. (This unit stops |
|
|
| automatically to protect the circuit |
|
|
| when the temperature rises.) | - |
| 0 | Recording stops automatically after | |
|
| 12 hours of continuous recording. |
|
|
|
|
|
| 0 | When there are multiple light sources | - |
|
| and depending on the shooting |
|
|
| conditions, exposure and focus may |
|
|
| not be adjusted correctly in the |
|
|
| Intelligent Auto mode. In this case, |
|
|
| adjust the settings manually. |
|
Playback
Sound or video is interrupted.
0 Sometimes playback is interrupted at | - |
the connecting section between two |
|
scenes. This is not a malfunction. |
|
22