Be sure to configure the following three settings before use.
Power Related Preparations(Using the Battery Pack)1 Set the power switch to OFF.Slide while pressing down the lock button.
Power offPlayback
Recording
Lock button
2 Attach the battery pack.Slide the battery pack down until it locks in place.
Bottom of the Camera
BATT.Controls in this sectionPower/Charge LampPower SwitchOpen the cover.
DC
Connector
To AC Outlet (110V to 240V)
AC Adapter
(ex.
●The power/charge lamp blinks to indicate charging has started.
●When the lamp goes out, charging is finished. Unplug the AC adapter from the AC outlet and disconnect the AC adapter from the camera.
To detach the battery packSlide and hold BATT. ( step 2), then remove the battery pack.
To check the remaining battery power ( pg. 14)Required charging / recording timeBattery pack | Charging time | Recording | |
time | |||
|
| ||
1 hr. 30 min. | 1 hr. 10 min. | ||
(Provided) | (1 hr. 5 min.) | ||
| |||
|
|
| |
2 hr. 40 min. | 2 hr. 25 min. | ||
(2 hr. 20 min.) | |||
|
| ||
|
|
| |
5 hr. 40 min. | 5 hr. 50 min. | ||
(5 hr. 30 min.) | |||
|
| ||
|
|
|
The times shown above are approximate times. The values within ( ) are the times when the LED light is on.
NOTE:You can also use the camera with just the AC adapter.
INDEX / / / / 49 MENU