When Using an SD Card

By default, the HDD is set as the recording medium. If you want to record to an SD card, the following three operations need to be performed.

NOTE:

For details on compatible SD cards, see “Check the compatibility of recording media” ( pg. 3).

Insert an SD card

Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted.

1 Open the SD card cover.

Bottom of the

Camera

2 Firmly insert the card with its clipped edge first.

Clipped Edge

Do not touch the terminal on the reverse side of the label.

3 Close the SD card cover.To remove an SD card

Push the SD card once.

After the card comes out a little, pull it out.

EN 15

Change the recording mediumPreparation:

Set the power switch to or .

1

DIS

CAMERA SETTING

STARTED

BASIC SETTING

REC MEDIA SETTING

 

DATE/DISPLAY

 

REGISTER EVENT

 

QUALITY

GETTING

2 Select [REC MEDIA SETTING].

 

Select

COPY/MOVE

 

0

NO. RESET

 

Set

VIDEO MODE

 

IMAGE MODE

 

 

 

 

FORMAT

 

 

CLEAN UP

 

3 Select [VIDEO MODE] or [IMAGE

 

MODE].

 

 

Select

 

 

Set

SD

 

 

 

 

HDD

 

4 Select [SD].

Select

Set

5

\

To change the recording medium back to the HDD

Select [HDD] in step 4.

Format an SD card when using it for the first time

This will also ensure stable speeds and operation when accessing the SD card.

For details on how to format an SD card, see “Formatting a Recording Medium” ( pg. 39).