JVC GZ-MG27U, GZ-MG37U MWB, [±0], –2.0, FINE, Menus, CLOUD, [AUTO], [AUTO], [AUTO], HALOGEN, Settings, MSET Menu, RECORDING, to +2.0 (EV), (Manual Focus), (Manual Exposure)

White paper

				EN
MSET Menu
Menus	Settings ([	] = Factory-preset)
AE	For video recording
(Manual Exposure)	[AUTO]: The brightness is adjusted automatically.
Adjusts the brightness.	–6 to +6: Corrects the brightness within this range in increments of 1.
	Use / to set the value.
	For still image recording
	[±0]: The brightness is not adjusted.
	–2.0 to +2.0 (EV): Corrects the brightness within this range in
	increments of 1/3EV. Use	/ to set the value.
	To lock the exposure
	When the menu disappears after you finish configuring the setting,
	press and hold 49 for more than 2 seconds. The		indicator appears.
AF	[AUTO]: The focus is adjusted automatically.

(Manual Focus)	: Adjusts the focus manually. Use / to set the focus.
Adjusts the focus.	(When zooming, the subject will not go out of focus if you adjust the
	focus at the telephoto (T) side before zooming to the wide-angle (W)
	side.)

23

RECORDING

WB

(White Balance) Adjusts the white balance to achieve the optimum colors for the amount of light in your surroundings during recording.

[AUTO]: White balance is adjusted automatically.

MWB: Adjusts the white balance manually depending on the light source.

1) Hold a sheet of plain white paper

in front of the subject. Adjust the

zoom, or position yourself so that the white paper fills the screen.

2) Press and hold 49 until the indicator starts blinking then stops blinking.

FINE: When shooting outdoors on a sunny day.

CLOUD: When shooting outdoors on a cloudy day.

HALOGEN: When a video light or similar type of lighting is used.

CONTINUED ON NEXT PAGE