Read This First!
Make a backup of important recorded data
JVC will not be responsible for any lost data. It is recommended to copy your important recorded data to a DVD or other recording media for storage. (Z pg. 14)
Make a trial recording
Before the actual recording of important data, make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly. We recommend you to use the same recording media when performing both the trial recording and the actual recording.
Reset the camcorder if it does not operate correctly (Z pg. 17)
Precautions on handling batteries
•Be sure to use the JVC
•If the camcorder is subjected to electrostatic discharge, turn the power off before using it again.
If a malfunction occurs, stop using the camcorder immediately and contact www.jvc.com or by phone at
Recorded data may be erased while the camcorder is being repaired or inspected. Back up all data before requesting repairs or inspections.
How to Select an Item Using the Touch Sensor
An example screen in English is used for the guidance below.
E.g. Selecting an item from the menu list
(on the menu screen)
R | MENU |
SHUTTER MODE | |
| IMAGE QUALITY |
| GAIN UP |
| BASIC SETTINGS |
S | Q |
QTouch the MENU button.
RSlide your finger up and down on the sensor.
STouch the OK button.
CAUTION
Touch the sensors with your finger. The sensors do not function if you touch them with your fingernail or with gloves on.
The
EDITED COPY
CHANGE EVENT REG.
EDIT PLAYLIST
BASIC SETTINGS
CHANGE REGISTERED EVENT