POWER | PLAY | FF |
|
| |
| REW |
|
| STOP | PAUSE |
|
|
E
N
17
Repeat Playback
START REPEAT
1 Press and hold PLAY (until "PLAY" blinks on the screen) during playback, then release.
●The entire tape is played back 50 times.
2 | STOP REPEAT |
To stop, press STOP at any time. | |
NOTE: | |
| Pressing PLAY, REW, FF or PAUSE also stops Repeat |
| Playback. |
Counter Reset
1
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 | 4 |
C.RESET |
|
|
|
| PLAY |
POWER
2
TIMER
RESET COUNTER TO ZERO
1 Press C.RESET.
Tape Position Indicator
The Tape position indicator appears on screen when, from the stop mode, you press FF or REW,
FF
REW
PAUSE
3 | STOP |
or perform an Index Search. The position of " 
" in relation to "B"
(Beginning) or "E" (End) shows you B + + + E where you are on the tape.
COUNT 0:33:27
NOTES:
●"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 18).
●It may take a few seconds for the Tape Position Indicator to be displayed.
Next-Function Memory
The Next Function Memory “tells” the VCR what to do after rewinding. Before continuing, ensure that the VCR is in stop mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the cassette's record safety tab is removed.
