JVC HR-A34U VCR Plus+ Timer Programming HR-A54U Only, Input Receiving Channel Number

24ENTIMERRECORDING

VCR Plus+

Timer

Programming

(HR-A54U

Only)

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

Timer recording allows you to program the VCR to automatically record a program that will be broadcast at some future time. The timer record function can be programmed using VCR Plus+ or Express Timer Programming up to 8 shows as far as a year in advance. (☞ pg. 24 or 28)

The VCR Plus+ timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the PlusCode number for the TV program you wish to record and the VCR's timer will be automatically programmed. (The PlusCodes are the numbers next to the programs in most TV listings.)

1	LOAD A CASSETTE
	Make sure the record safety tab is present.
	● The VCR’s power comes on automatically.
2	ACCESS VCR PLUS+ SCREEN
	Press PROG. on the		VCR PLUS+
	remote control.
	● The clock must be set in
	order to access the VCR
	Plus+ screen. If you	PRESS NUMBER KEY (0–9)
	haven’t set the clock, the
		PRESS (+/–) TO SET
	Main Menu screen		EXPRESS PROGRAMMING
	appears after an error	PRESS (PROG.) TO END
	message is displayed.
	Refer to page 9 for the clock setting procedure.
3	ENTER PLUSCODE NUMBER
	Press the appropriate		VCR PLUS+
	NUMBER keys to enter the
	PlusCode number printed		123
	in the TV listings for the
	TV program you wish to
	record and press OK.	PRESS NUMBER KEY (0–9)
	If the Guide Channel Set

1

1 2 3

4 5 6

7 8 9

0 4

CANCEL

3

OK

2

NUMBER

screen appears, go to step	THEN (OK)
	PRESS (PROG.) TO END
4.
If the VCR Plus+ Program screen appears, go to step 5.
● To make corrections, press CANCEL and input the
correct PlusCode number.

INPUT RECEIVING CHANNEL NUMBER

The Guide Channel Number, which is assigned to the
TV or cable station for the	GUIDE CHANNEL SET
4 PlusCode number that you
		GUIDE CH: 12
entered in step 3, will
		VCR CH : –––
appear automatically on
the Guide Channel Set
screen. Input the number	PRESS NUMBER KEY (0–9)
of the channel on which
	OR (5,°), THEN (OK)
the broadcast for the
	PRESS (PROG.) TO END
PlusCode number is
received on the VCR or cable box using the NUMBER
keys, CH 5° or %Þ, then press OK.

●The Guide Channel Set screen appears only when you input the PlusCode number of a station for which the Guide Channel number has not been set already.