JVC HR-A51U manual Access Tuner SET Screen, Set Receivable Channels

PRESS (MENU) TO END

14ENINITIALSETTINGS(cont.)

Tuner

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

Set Receivable Channels

TURN ON THE VCR

1 Press POWER.

ACCESS MAIN MENU

SCREEN

POWER MENU

1

OK

POWER

2 Press MENU.
	ACCESS TUNER SET
	SCREEN
	Move the highlight bar	MAIN MENU
	(arrow) to "TUNER SET" by
3 pressing CH5° or		FUNCTION SET
		=TUNER SET
	SHUTTLE PLUS%Þ, then	INITIAL SET
	press OK or SHUTTLE
	PLUS%.
		PRESS (5,°), THEN (OK)
		PRESS (MENU) TO END
	PERFORM AUTO CHANNEL
	SET
	Move the highlight bar	TUNER SET
	(arrow) to "AUTO
4 CHANNEL SET" by		BAND	CATV
		=AUTO CHANNEL SET
	pressing CH5° or	MANUAL CHANNEL SET

1 2 3

4 5 6 2

7 8 9

0 4

–+

MENU

3	SHUTTLE PLUS
OK

SHUTTLE PLUS%Þ, then
press OK or SHUTTLE
PLUS%.
	SELECT WITH (5,°) AND (OK)
	PRESS (MENU) TO END
Receivable channels in
your area are	AUTO CHANNEL SET
automatically assigned to
the CH5°(+/–) buttons,
and non-receivable	SCANNING...
channels are skipped.

NOTES:

At the end of Auto Channel Set, “SCAN

COMPLETED” appears on screen.

If the scan was unsuccessful, “SCAN COMPLETED -NO SIGNAL-” appears on screen. Check the connections and start again.

RETURN TO NORMAL

SCREEN

5 Press MENU.

INFORMATION

The VCR detects the band (TV or CATV) and selects the correct band automatically during Auto Channel Set. The selected band will be displayed on the right side of "BAND" on the Tuner Set screen.