JVC HR-A51U manual Edit To, Another VCR

EDITING

EN33

Edit To		You can use your VCR as the player and another VCR as the
		recorder.
		MAKE CONNECTIONS
Another VCR		VIDEO IN and AUDIO IN connectors.
		1 Connect an AV cable between your VCR’s VIDEO OUT
		and AUDIO OUT connectors and another VCR’s
		When connecting to a monaural VCR, connect your
Player	Your VCR	VCR’s AUDIO OUT L connector to the AUDIO IN
		connector on the monaural VCR.
		LOAD CASSETTES
		Insert the playback cassette into your VCR and the
		2 cassette to be recorded on into the other VCR.
		SET RECORDER’S INPUT
	AUDIO OUT	MODE
	VIDEO OUT	3 Set the other VCR's auxiliary (AV) input mode.
	Audio/Video cable
	(not supplied)	SELECT “EDIT” FOR PIC-
	AUDIO IN
VIDEO IN		TURE CONTROL SET MODE

4	Follow the “Picture Control” section on page 21, then
	NOTE:select “EDIT.”

			When you select “EDIT” to dub tapes, be sure to select
			AUTO or (NORM when AUTO PICTURE is set to OFF)
			after you finish dubbing the tapes.
Recorder	Another VCR
			START PLAYER
	5
			Set to its play mode.
			NOTE:
			If the player is equipped with a superimpose/OSD
			disable feature then set "SUPERIMPOSE" to OFF before
			pressing PLAY ( pg. 24).
			START RECORDER
		6 Set to its record mode.