JVC HR-A53U instruction manual Perform Auto Channel SET, Return to Normal Screen

TUNER SET

BAND

AFC

=AUTO CHANNEL SET

MANUAL CHANNEL SET

PRESS (5,°), THEN (OK)

PRESS (MENU) TO END

AUTO CHANNEL SET

SCANNING ...

PRESS (MENU) TO END

10INITIALSETTINGS(cont.)

OK

2 3

q 5/8 6

MENU

1 2 3

4 5 6

7 8 9

0

MENU

CH		OK
1	3	Á
¦	7	8

PERFORM AUTO CHANNEL SET

6 Place the arrow next to "AUTO CHANNEL SET" by pressing CH5°, then press OK.

●Receivable channels in your area are

automatically assigned to the CH5°buttons, and non-receivable channels are skipped.

NOTES:

● At the end of Auto Channel Set, “SCAN COMPLETED” appears on screen.

●If the scan was unsuc-

cessful, “SCAN COMPLETED– NO SIGNAL” appears on screen:

If you own the HR-A53U, check the connections and start again.

If you own the HR-A33U, check both band setting and connections and start again.

RETURN TO NORMAL

SCREEN

7 Press MENU as many times as necessary.

For HR-A53U Owners:

The VCR detects the band (TV or CATV) and selects the correct band automatically during Auto Channel Set.

If necessary, you can check the setting at the Band screen after Auto Channel Set has set the channels.

●At the Tuner Set screen, place the arrow next to "BAND" by pressing CH5°, then press OK.

TUNER SET	BAND
=BAND	TV
AFC	=CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
PRESS (5,°), THEN (OK)	PRESS (5,°) TO SELECT
PRESS (MENU) TO END	PRESS (MENU) TO END

●Press MENU as many times as necessary to return to the normal screen.