JVC HR-A53U Engage Manual Tracking Mode, Adjust Manual Tracking, RE-ENGAGE Automatic Tracking

FF

EW

2 3

q 5/8 6

CH

	1	2	3
	4	5	6
	7	8	9
		0
CH
1	3		Á	FF
REW	7		8
¦

SEARCH

15

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually.

ENGAGE MANUAL

TRACKING MODE

1 During playback, press the CH5 and ° buttons on the

VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.

ADJUST MANUAL

TRACKING

2 Press CH5 or ° on the VCR's front panel or remote. Press briefly for fine adjust, or press and hold for coarse adjust. Watch the screen and continue adjusting until optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC

TRACKING

3 Press the CH5and ° buttons on the VCR's front panel simultaneously.

●When automatic tracking is re-engaged, Auto Picture is automatically activated.

NOTES:

●To obtain a noiseless still picture it may be necessary to adjust tracking in slow playback and then engage Pause.

●Manual tracking is possible during hands-free slow-motion. During hands-free slow-motion playback, simply press CH5 or ° on the VCR's front panel or remote to adjust tracking.

Index Search

Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.

1		START SEARCH
		While the tape is stopped, press SEARCH Tor Y.
		ACCESS DISTANT CODE
2		To access a recording 2–9 index codes away, press
		SEARCH Tor Yrepeatedly until the correct
	number is displayed on screen (only if SUPERIMPOSE
	is set to ON (☞ pg. 17). Playback begins automatically
		when the desired recording is located.
		● If necessary press REW or FF when play starts to
		search visually to find the very beginning of the
		desired program.

NOTE:

An index code is not placed on the tape when recording is paused and then resumed.